PRINCE u.PVC FITTINGS

SARHAD PLASTIC is manufacturing a wide range of injection moulded & fabricated u.PVC Fittings in Pakistan under the brand name "PRINCE" according to U.S Standards ASTM 0-2665 & 2466 ranging from 3" dia to 16" dia in white & light gray color.

DIMENSION & STANDARDS

All the dimension of solvent cement fittings such as bore, socket height and thickness are according to American and British Standards requirement.

WORKING PRESSURE

u.PVC Fittings 3" dia continues sustained working pressure 590 PSI
u.PVC Fittings 4" dia continues sustained working pressure 470 PSI

ADVANTAGES

• NOT CORRODED & completely unaffected by Acids, Alkalis and electrolytic corrosion from any source.

• EXCELLENT HYDRAULIC CHARACTERISTIC. Is has extremely smooth bore as such frictional losses are at minimum and flow rates at the highest possible.

• NOT FLAMMABLE

• BIOLOGICAL GROWN RESISTANT due to smoothness of inner of u.PVC fittings prevents formation of algaei, bacteria and fungus formation inside the fittings.

• LONG LIFE more than 50 years is estimated for u.PVC Fittings.

PHYSICAL, THERMAL AND MECHANICAL PROPERTIES

1. Specific Gravity 1 .43
2. Opacity < 0.05%
3. Water Absorption 2.4 mg/cm2
4. Imflammability will not support conbustion
5. Vic at Softening Point 80 Oeg. C 2
6. Tensile strength (N/mm2 ) 525 kglcm
7. Elongation at Break Point 60%
8. Impact Strength (izod, Jim 120 Jim)
9. K value 58
10. Shore Hardness 80
11. Hydraulic Test up to 500 PSI